Creating a Wash Program
Creating a New Wash Program
To create a new wash program press the + icon seen in the Wash Programs menu.
Change a Wash Program Name
To set a custom name for the Wash Program, press the Edit icon on the program bar. This will open the edit menu, where you can create a custom name.
Renumber a Wash Program
To Renumber a Wash Program, press the Edit button on the Wash Program bar. Click on the Renumber tab and use the drop down menu to select the new program number to set.
Copy a Program
To Copy an existing program to a new program, press the Edit icon on the Wash Program. Select the Copy To icon and select the program you want to copy the settings over to.
Delete a Program
To Delete an existing program, press the Edit icon on the Wash Program bar to open the menu. Select the Delete icon and confirm.
Setting Pump Delivery
To activate a Pump Delivery on input, press the arrow to expand the program bar. This will display all Inputs that are programmable for the unit. Select the Input you wish to program and use the toggle to activate the pumps you want to run. Repeat this for all inputs you wish to activate for the program run.
Setting Pulse Count
You are able to set up a Pulse Count to counteract phantom signals, use the Set Pulse box in the top right of the input menu to adjust this.
Write the Settings
To complete the program setup, you will need to write the settings to the unit. Use the Write button located in the toolbar.