How do I assign a flush valve and adjust the settings
on my Nexus unit?
A short article on how to assign the flush valve and adjust the settings using the main keypad on your Nexus unit.
From the first screen, press the RIGHT arrow and enter the pass code to proceed.
Press the RIGHT arrow to navigate to the Set Manifold Settings.
On the Set Manifold Settings screen, select YES using the UP or DOWN arrow. Press the
On the next screen, use the UP and DOWN arrows to change which flush valve the selected pump will use. LEFT and RIGHT will change the selected pump. Continue to press RIGHT to move out of the menu.
The next screen will show the Flush Settings. You can change this between ‘DURING & AFTER’ to ‘AFTER ONLY’ using the UP and DOWN arrow. Press the RIGHT arrow to advance and save the setting.
– Assign the Flush Valve and Adjust Flush Valve Settings